How to deal with the maintenance of the outer flat drill pipe and drilling rig

Classification:

Industry dynamics

Release time:

2020-09-02

【Summary Description】 The outer flat drill pipe and the drilling rig need to be maintained regularly after use, so as to extend the life of the equipment. Increase work efficiency and do not delay the normal work. In fact, if you want the drilling rig to perform at a normal level, you must do enough maintenance and maintenance work at ordinary times, so as to ensure the normal performance of the drilling rig.

Outer flat drill pipeAnd after the use of drilling rigs are required to do regular maintenance, so as to extend the life of the equipment. Increase work efficiency and do not delay the normal progress of work. In fact, if you want the drilling rig to play a normal level, you must do enough maintenance and maintenance work at ordinary times, so as to ensure the normal performance of the drilling rig.

外平钻杆

It is necessary to understand the maintenance of the drilling rig.

First of all, it is necessary to do a good job in all its inspections. It is necessary to regularly check the fixing of the rotary table of the drilling rig to check whether it is flat, positive, stable and firm. Check whether the running sound is normal and whether the spring sealing ring at the end of the power input shaft is reliable. Each shift checks whether the oil level in the oil tank meets the requirements, and the oil level must be stopped.The results of the examination after 5 points of porridge shall prevail. Check the cleanliness of the oil, if the oil is dirty, change the oil in time. Check the oil pool and bearing temperature is normal, if not normal, should immediately find the cause.Outer flat drill pipeTo regularly check the input shaft end of the cardan shaft connecting flange (or sprocket) for axial movement, if so, should tighten the shaft end pressure plate screw.

In addition, it is strictly prohibited to use turntable collapse buckle to prevent damage to gear teeth. During the drilling and tripping process of the drilling rig, the parts shall be prevented from being damaged. The drilling platform and rotary table surface shall be kept clean. Tighten the oil dipstick and grease nipple.

After the rotary table of the drilling rig bears large impact load (such as sticking and drilling), pay attention to check whether the running sound is abnormal.

Drilling rigs are indispensable in our lives, so if you want to make the drilling rig play a normal power without affecting the progress of the project, you must pay more attention to its maintenance work at ordinary times.

Key words:

weilida drill